Features US
Service voltage: 18 … 30 V DC
No-load current (max.): 30 mA (24 V DC)
Inverse polarity protection: Yes
Short-circuit protection: Yes
Insulation voltage endurance: 500 V
Thread: M8 x 1
Housing length: 70 mm
Transmission exit: axial
Assembly distance (sensor to sensor): 60 mm
Housing material: Brass (CuZn, nickel-plated)
Material: Epoxy resin, PUR (Transducer surface)
Weight: 10 g
Protection class: III, operation on protective low voltage
Operating principle: Ultrasonic sensor, Ultrasonic barrier
Evaluation: digital
Design: Thread
Characteristics: IO-Link
Parallel operation possible: No
Functional scope
Scope of delivery: Sensor, 2 x M8 nuts
Functions: Teach (Pin 2), Out 1, IO-Link (Pin 4)
Switching output: Push-pull, 150 mA, NO/NC, switchable
Max. switch current: 150 mA
Voltage drop (max.): 2 V
Interface: IO-Link (V1.1, COM2 38.4 kBd, Smart Sensor Profile)
Nominal switching distance (Sn): 100 mm
Range: 20 … 100 mm
Adjustment range: 20 … 100 mm (Teach in)
Resolution: 0,1 mm
Standardized measuring plate: 20 x 20 mm
Switching hysteresis (max.): 1 … 5 mm (Adjustable by IO-Link)
Reproducibility: 0,3 mm
Sensitivity adjustment: Remote teach
Display: LED Green - Status, 1x yellow - Switching output
Ultrasonic frequency: 484 kHz
Switching frequency: 20 Hz
Readiness delay (max.): 300 ms
Shock/vibration load: 30 g, 11 ms / 10 … 55 Hz, 1,0 mm
Ambient temperature during operation: 0 … +50 °C
Temperature drift: 0,2 %/K (uncompensated)
Temperature drift: 1 %/Sn (compensated)
Protection type: IP 67
Connection: Connector, M8, 4-pin
Accessories
Connection cable: TK … /4
