Specifications KNS D6.5KM 2B G3-T3 212671
The KNS D6.5KM 2B G3-T3 is a high-performance safety switch designed to enhance safety measures in industrial settings. Its key features and technical specifications include:Type: This device belongs to the category of safety switches, specifically designed for safeguarding machinery and personnel.Contact Configuration: It has 2 normally closed (NC) safety contacts, which ensure that the switch is in a safe state when the actuator is not engaged.Actuator: The KNS D6.5KM 2B G3-T3 is typically used with a separate actuator. When the actuator is not engaged, the safety contacts remain closed.Protection Level: It offers a high degree of protection with an IP67 rating, making it suitable for use in harsh industrial environments where dust and moisture are prevalent.Voltage Rating: The device is designed to handle various voltage ratings, typically up to 250V AC/DC.Temperature Range: It can operate effectively within a wide temperature range, allowing it to function reliably in different climates and conditions.The KNS D6.5KM 2B G3-T3 is commonly utilized in industrial machinery and equipment to ensure the safety of operators and prevent unauthorized access to hazardous areas. When properly integrated into a safety system, it can halt machinery operation or trigger safety protocols when the actuator is disengaged or tampered with, thereby reducing the risk of accidents and injuries.Its robust construction and reliable performance make it a crucial component in industrial safety applications, where the protection of both personnel and machinery is of utmost importance.
Features KNS D6.5KM 2B G3-T3 212671
Service voltage: 18 … 30 V DC
No-load current (max.): 15 mA
Insulation voltage endurance: 500 V
Installation type: Flush
Diameter: Ø 6,5 mm (Diameter)
Housing length: 44,9 mm
Housing material: Brass (nickel-plated)
Weight: 5 g
Protection class: III, operation on protective low voltage
Operating principle: Capacitive
Design: Cylinder
Functional scope
Operation modes: STANDARD, HIGH RESOLUTION, SPEED
Switching output: Push-pull, 100 mA, NO/NC
Voltage drop (max.): 2 V
Interface: IO-Link
Switching distance (SN): 2 mm (0.2 to 3 mm adjustable via IO-Link)
Standardized measuring plate: 8 x 8 mm
Switching hysteresis (max.): 15 %
Sensitivity adjustment: IO-Link
Display: LED yellow - Output signal
Switching frequency (factory setting): 100 Hz (STANDARD)
Switching frequency (STANDARD): 100 Hz
Switching frequency (HIGH RESOLUTION): 10 Hz
Switching frequency (SPEED): 200 Hz
Readiness delay (max.): 300 ms
Ambient temperature during operation: -25 … +70 °C
Protection type: IP 65 / IP 67
Connection: Connector, M8, 3-pin
Accessories
Connection cable: TK …