Ball valve  END-Armaturen ZA29-EE100/AN24DC
Ball valve  END-Armaturen ZA29-EE100/AN24DC

We are not the manufacturer, authorised distributor or authorised representative of the END-Armaturen brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

ZA29-EE100/AN24DC END-Armaturen Ball valve

Manufacturer

END-Armaturen

Country

Germany

Part number

ZA29-EE100/AN24DC

Category

Coupling ball valves

Type

Ball valve

Stock availability:

On request

709 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications ZA29-EE100/AN24DC

If you are looking for END-Armaturen ZA29-EE100/AN24DC, reach FAMAGA, the world's leading producer of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are depicted in the quality of outputs and personalseparate attention to each client. We admire everyone, who liased with us - so, our regular clients receive the most beneficial purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the earth . A well-elaborated logistics bond and a partnership network guide us to conduct our goods anywhere in the world immediately without compromising product quality.

A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of factory-made equipment.

All outcomes from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this bulk is growing every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.

To get some advice or place an order, get in touch with us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features ZA29-EE100/AN24DC

2-way stainless steel ball valve for shut-off of inert gases and liquids. The body is made of a three-part screwed body construction with full cylindrical bore. Due to the self-adjusting, multi-part stem seal, the ball valve is maintenance-free. The ball valve is stamped conform to AD approval and has a fire-safe certification and an anti-static device. A TA-Luft approval is in preparation. The mounting plate according to ISO 5211 enables a direct or distanced mounting of the pneumatic actuators, resulting in an extremely compact and functional unit. Due to the twin-piston system the force developed by the counter-running pistons is transmitted to one common pinion via two tooth racks solidly connected with the pistons. This principle ensures a linear torque transmission along the entire stroke. Also directly mounted is the solenoid valve. After installation in the pipeline and the connection of control signal and compressed air supply, the unit is immediately ready for use. The function of this ball valve actuator unit is pneumatically double-acting. Further information can be found in our technical portal. The actuator and the solenoid valve are completely assembled in our factory, adjusted and subjected to a functional test before delivery. Features:
  • Mounting pad for actuator with two scribed circles
  • Simple, standardized assembly of extensions, signal transmitters or control devices conform with EN 12116 (ISO5211)
  • Stem seals with spring washer set and lock plate, maintenance free
  • Body parts with centering grooved and tongued, for ease assembly (e.g. after welding)
For higher temperatures above +80°C please refer to the Pressure-Temperature-Diagram in the data sheet. The ball valve is available in many variants and designs and can be ordered online in our shop:
  • two sides female threaded connection
  • two sides welded connection
  • cavity-free sealing system
  • Temperature version with pressure compensation bore and ball seals with reinforced carbon fibre
  • direct mounted limit switches and solenoid valves
For the use of the ball valve in explosive atmospheres according to Directive 2014/34/EU, a special ATEX version is also available.
SKU ZA29-EE100/AN24DC
Description Ball valve ZA 21/2 female, with drive EE100, Stainless steel / PTFE FKM, spring return
Weight [kg] 17.750000
Control valve 24V DC
Ball material Stainless steel
Nominal size 21/2
Body material Stainless Steel
Function single acting
Body material Edelstahl
Seals material PTFE
Stem seals material PTFE/FKM/Graphit
Operation pneumatic - single acting
Connection type female / female
Connection size 21/2
Nominal pressure min. [bar] 0
Nominal pressure max. [bar] 16
Test pressure PT [bar] 24
Temperature range min. [°C] -10
Temperature range max. [°C] +70
Media temperature min. [°C] -30
Media temperature max. [°C] +110
Gehäusedesign 3-teilig