Ball valve  END-Armaturen ZA310023/HT-ED630432
Ball valve  END-Armaturen ZA310023/HT-ED630432

We are not the manufacturer, authorised distributor or authorised representative of the END-Armaturen brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

ZA310023/HT-ED630432 END-Armaturen Ball valve

Manufacturer

END-Armaturen

Country

Germany

Part number

ZA310023/HT-ED630432

Category

Coupling ball valves

Type

Ball valve

Stock availability:

On request

158 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications ZA310023/HT-ED630432

If you are seeking END-Armaturen ZA310023/HT-ED630432, make contact with FAMAGA, the world's central provider of industrial equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of outcomes and particular attention to each consumer. We appreciate everyone, who collaborated with us - therefore, our regular clients accept the most acceptable purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4 thousand such customers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the globe . A well-developed logistics chains and a partnership network cheer us to ship our items anywhere in the globe immediately without damaging product quality.

A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the direction of industrial equipment.

All products from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as stay in control.

To consult or book, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features ZA310023/HT-ED630432

2-way stainless steel ball valve for shut-off of inert gases and liquids. The body is made of a three-part screwed body construction with full cylindrical bore. Due to the self-adjusting, multi-part stem seal, the ball valve is maintenance-free. The ball valve is stamped conform to AD approval and has a fire-safe certification and an anti-static device. A TA-Luft approval is in preparation. The mounting plate according to ISO 5211 enables a direct or distanced mounting of the pneumatic actuators, resulting in an extremely compact and functional unit. Due to the twin-piston system the force developed by the counter-running pistons is transmitted to one common pinion via two tooth racks solidly connected with the pistons. This principle ensures a linear torque transmission along the entire stroke. The ball valve in this temperature version has a ball with pressure compensation bore and carbon fiber reinforced seals. The actuator has special, high-temperature-resistant body caps and seals. The actuator is mounted at a distance to dissipate temperatures and provide space for pipe insulation. The function of this ball valve actuator unit is pneumatically double-acting. Further information can be found in our technical portal. The actuator is completely assembled in our factory, adjusted and subjected to a functional test before delivery. Features:
  • Mounting pad for actuator with two scribed circles
  • Simple, standardized assembly of extensions, signal transmitters or control devices conform with EN 12116 (ISO5211)
  • Stem seals with spring washer set and lock plate, maintenance free
  • Body parts with centering grooved and tongued, for ease assembly (e.g. after welding)
For higher temperatures above +80°C please refer to the Pressure-Temperature-Diagram in the data sheet. The ball valve is available in many variants and designs and can be ordered online in our shop:
  • two sides female threaded connection
  • two sides welded connection
  • cavity-free sealing system
  • direct mounted limit switches and solenoid valves
For the use of the ball valve in explosive atmospheres according to Directive 2014/34/EU, a special ATEX version is also available.
SKU ZA310023/HT-ED630432
Description Ball valve-ZA / HT, 1/2 -Innengew., With drive ED, Stainless steel / PTFE FKM, double acting
Weight [kg] 1.600000
Nominal size 1/2
Body material Stainless Steel
Function double acting
Body material Edelstahl
Seals material PTFE carbon-reinforced (Temperature)
Stem seals material PTFE/FKM
Operation pneumatic - double acting
Connection type female / female
Connection size 1/2
Nominal pressure min. [bar] 0
Nominal pressure max. [bar] 16
Temperature range min. [°C] -20
Temperature range max. [°C] +140
Media temperature min. [°C] -30
Media temperature max. [°C] +196
Gehäusedesign 3-teilig