Ball valve  END-Armaturen ZA310063/HT-ED630552
Ball valve  END-Armaturen ZA310063/HT-ED630552

We are not the manufacturer, authorised distributor or authorised representative of the END-Armaturen brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

ZA310063/HT-ED630552 END-Armaturen Ball valve

Manufacturer

END-Armaturen

Country

Germany

Part number

ZA310063/HT-ED630552

Category

Coupling ball valves

Type

Ball valve

Stock availability:

On request

192 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications ZA310063/HT-ED630552

If you are looking for END-Armaturen ZA310063/HT-ED630552, contact FAMAGA, the world's primary distributor of factory-made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of products and special attention to each user. We respect everyone, who joined with us - thus, our regular consumers pick up the most beneficial purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such purchasers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world . A well-developed logistics series and a partnership network assist us to send our units anywhere in the world quickly without discrediting product quality.

A particular source of good name for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.

All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this number is growing every day. We are glad that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as not to lower the bar.

To request or place an order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features ZA310063/HT-ED630552

2-way stainless steel ball valve for shut-off of inert gases and liquids. The body is made of a three-part screwed body construction with full cylindrical bore. Due to the self-adjusting, multi-part stem seal, the ball valve is maintenance-free. The ball valve is stamped conform to AD approval and has a fire-safe certification and an anti-static device. A TA-Luft approval is in preparation. The mounting plate according to ISO 5211 enables a direct or distanced mounting of the pneumatic actuators, resulting in an extremely compact and functional unit. Due to the twin-piston system the force developed by the counter-running pistons is transmitted to one common pinion via two tooth racks solidly connected with the pistons. This principle ensures a linear torque transmission along the entire stroke. The ball valve in this temperature version has a ball with pressure compensation bore and carbon fiber reinforced seals. The actuator has special, high-temperature-resistant body caps and seals. The actuator is mounted at a distance to dissipate temperatures and provide space for pipe insulation. The function of this ball valve actuator unit is pneumatically double-acting. Further information can be found in our technical portal. The actuator is completely assembled in our factory, adjusted and subjected to a functional test before delivery. Features:
  • Mounting pad for actuator with two scribed circles
  • Simple, standardized assembly of extensions, signal transmitters or control devices conform with EN 12116 (ISO5211)
  • Stem seals with spring washer set and lock plate, maintenance free
  • Body parts with centering grooved and tongued, for ease assembly (e.g. after welding)
For higher temperatures above +80°C please refer to the Pressure-Temperature-Diagram in the data sheet. The ball valve is available in many variants and designs and can be ordered online in our shop:
  • two sides female threaded connection
  • two sides welded connection
  • cavity-free sealing system
  • direct mounted limit switches and solenoid valves
For the use of the ball valve in explosive atmospheres according to Directive 2014/34/EU, a special ATEX version is also available.
SKU ZA310063/HT-ED630552
Description Ball valve-ZA / HT, DN20-Weld., With drive ED55, Stainless steel / PTFE FKM, double acting
Weight [kg] 2.500000
Nominal size DN020
Body material Stainless Steel
Function double acting
Body material Edelstahl
Seals material PTFE carbon-reinforced (Temperature)
Stem seals material PTFE/FKM
Operation pneumatic - double acting
Connection type Welding Connection DIN3239
Connection size DN20
Nominal pressure min. [bar] 0
Nominal pressure max. [bar] 16
Test pressure PT [bar] 24
Temperature range min. [°C] -20
Temperature range max. [°C] +140
Media temperature min. [°C] -30
Media temperature max. [°C] +196
Gehäusedesign 3-teilig