We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
SL-C40F
Type
Mounting bracket
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Keyence SL-C40F , contact FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of products and personalseparate attention to each consumer. We appreciate everyone, who worked with us - therefore, our regular customers obtain the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, United Arab Emirates, Mozambique, Iran, Madagascar, Guinea-Bissau, Fiji, The Bahamas, Morocco, Guyana, Colombia, Japan, Samoa, Mexico, Ireland, Romania, Uruguay, Syria, Egypt, Israel, Indonesia, Equatorial Guinea, Nicaragua, Philippines, Namibia, Swaziland, Senegal, Burkina Faso, Cape Verde, Hungary, Vietnam, Togo, Seychelles, Switzerland, El Salvador, Tajikistan, Algeria, Suriname, South Korea, Croatia, Luxembourg, Panama, Peru, Mauritania, Zimbabwe, Kyrgyzstan. A well-developed logistics bond and a partnership network let us to deliver our units anywhere in the world promptly without compromising product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Model | SL-C40F | ||
| Effective aperture angle | Max. ±2.5 ° (when operating distance is at least 3 m) | ||
| Response time | 15 ms *1 | ||
| Light source | Infrared LED (850 nm) | ||
| Operation mode | Turned on when light is being applied to all optical axes (excluding when the blanking function is used) | ||
| Detection capability | o14 mm (when the blanking function is not used) | ||
| No. of beam axes | 40 | ||
| Detection zone | 390 mm | ||
| Protection area | 414 mm | ||
| Detectingdistance | 0.1 to 7 m | ||
| Operating distance/Beam width | |||
| Beam axis interval | 10 mm | ||
| Lens diameter | o4mm | ||
| OSSD output | Output type | 2 outputs each for PNP and NPN, Can be switched using the connection connector cable | |
| Max. load current | 300 mA *2 | ||
| OFF-state voltage | 2.5 V (with a cable length of 7 m) | ||
| Leakage current | 100 µA maximum*3 | ||
| Max. capacitive load | 2.2 µF (with a load resistance of 100 ?) | ||
| Load wiring resistance | 2.5 ? maximum*4 | ||
| Approved standards | EMC | EMS | IEC61496-1, EN61496-1, UL61496-1 |
| EMI | EN55011 Class A, FCC Part15 Class A | ||
| Safety | IEC61496-1, EN61496-1, UL61496-1 (type 4 ESPE),IEC61496-2, EN61496-2, UL61496-2 (type 4 AOPD),UL508 | ||
| Current consumption | Transmitter | 79 mA | |
| Receiver | 76 mA | ||
| Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less | |
| Environmental resistance | Enclosure rating | IP65 (IEC60529) | |
| Ambient light | Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less | ||
| Operating ambient temperature | -10 to +55 °C (No freezing) | ||
| Storage temperature | -10 to +60 °C (No condensation | ||
| Operating relative humidity | 35 to 85 % RH (No condensation) | ||
| Storage relative humidity | 35 to 95 % RH (No condensation) | ||
| Vibration resistance | 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions | ||
| Shock resistance | 100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | ||
| Material | Main unit case | Aluminum | |
| Upper case/lower case | Zinc die-cast | ||
| Front cover | Polycarbonate | ||
| Weight | Transmitter | Approx 335 g | |
| Receiver | Approx 370 g | ||
| *1 OFF>ON return time is 125 ms. *2 Note the derating illustrated in the graph to the right when using PNP output. *3 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. *4 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output |
