We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
SL-C40H
Type
Mounting bracket
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Keyence SL-C40H , connect FAMAGA, the world's foremost company of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are depicted in the quality of merchandises and individual attention to each orderer. We understand everyone, who engaged with us - therefore, our regular clients pick up the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Panama, Poland, Thailand, Latvia, San Marino, Nicaragua, Monaco, Nepal, The Bahamas, Slovenia, Netherlands, Finland, Comoros, United States, Singapore, New Zealand, Dominica, Guatemala, Hungary, Madagascar, Sudan, Guyana, Jamaica, Mali, Yemen, Bulgaria, Belarus, China, Chile, United Arab Emirates, Bolivia, Mozambique, Vietnam, Russia, Zimbabwe, Equatorial Guinea, Morocco, Burkina Faso, Philippines, Estonia, Cyprus, Serbia, Egypt, Haiti, Rwanda. A advanced logistics network and a partnership network allow us to conduct our goods anywhere in the world as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Model | SL-C40H | ||
| Effective aperture angle | Max. ±2.5 ° (when operating distance is at least 3 m) | ||
| Response time | 15 ms *1 | ||
| Light source | Infrared LED (850 nm) | ||
| Operation mode | Turned on when light is being applied to all optical axes (excluding when the blanking function is used) | ||
| Detection capability | o25 mm (when the blanking function is not used) | ||
| No. of beam axes | 40 | ||
| Detection zone | 780 mm | ||
| Protection area | 825 mm | ||
| Detectingdistance | 0.3 to 9 m | ||
| Operating distance/Beam width | |||
| Beam axis interval | 20 mm | ||
| Lens diameter | o5mm | ||
| OSSD output | Output type | 2 outputs each for PNP and NPN, Can be switched using the connection connector cable | |
| Max. load current | 300 mA *2 | ||
| OFF-state voltage | 2.5 V (with a cable length of 7 m) | ||
| Leakage current | 100 µA maximum*3 | ||
| Max. capacitive load | 2.2 µF (with a load resistance of 100 ?) | ||
| Load wiring resistance | 2.5 ? maximum*4 | ||
| Approved standards | EMC | EMS | UL61496-1 |
| EMI | FCC Part15 Class A | ||
| Safety | UL61496-1 (type 4 ESPE), UL61496-2 (type 4 AOPD),UL508 | ||
| Current consumption | Transmitter | 81 mA | |
| Receiver | 86 mA | ||
| Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less | |
| Environmental resistance | Enclosure rating | IP65 (IEC60529) | |
| Ambient light | Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less | ||
| Operating ambient temperature | -10 to +55 °C (No freezing) | ||
| Storage temperature | -10 to +60 °C (No condensation | ||
| Operating relative humidity | 35 to 85 % RH (No condensation) | ||
| Storage relative humidity | 35 to 95 % RH (No condensation) | ||
| Vibration resistance | 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions | ||
| Shock resistance | 100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | ||
| Material | Main unit case | Aluminum | |
| Upper case/lower case | Zinc die-cast | ||
| Front cover | Polycarbonate | ||
| Weight | Transmitter | Approx 525 g | |
| Receiver | Approx 575 g | ||
| *1 OFF>ON return time is 125 ms. *2 Note the derating illustrated in the graph to the right when using PNP output. *3 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. *4 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output |
