We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Keyence SL-C96F , make contact with FAMAGA, the world's foremost company of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of goods and private attention to each orderer. We praise everyone, who engaged with us - thus, our regular consumers pick up the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Burma, Norway, Finland, Armenia, Kyrgyzstan, Costa Rica, Greece, Afghanistan, Thailand, Belize, Malawi, Macedonia, Cameroon, Kazakhstan, Botswana, Lebanon, Moldova, North Korea, Panama, Nigeria, Egypt, Montenegro, Suriname, The Gambia, Laos, Serbia, Uzbekistan, Denmark, Bosnia and Herzegovina, Cyprus, Uganda, Kenya, Dominica, Paraguay, Israel, Mauritania, Mali, Eswatini, Ghana, Mauritius, Senegal, Equatorial Guinea, Tonga, Hungary, Vietnam. A well-built logistics network and a partnership network let us to dispatch our units anywhere in the globe promptly without disreputing product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Model | SL-C96F | ||
Effective aperture angle | Max. ±2.5 ° (when operating distance is at least 3 m) | ||
Response time | 15 ms *1 | ||
Light source | Infrared LED (850 nm) | ||
Operation mode | Turned on when light is being applied to all optical axes (excluding when the blanking function is used) | ||
Detection capability | o14 mm (when the blanking function is not used) | ||
No. of beam axes | 96 | ||
Detection zone | 950 mm | ||
Protection area | 974 mm | ||
Detectingdistance | 0.1 to 7 m | ||
Operating distance/Beam width | |||
Beam axis interval | 20 mm | ||
Lens diameter | o4mm | ||
OSSD output | Output type | 2 outputs each for PNP and NPN, Can be switched using the connection connector cable | |
Max. load current | 300 mA *2 | ||
OFF-state voltage | 2.5 V (with a cable length of 7 m) | ||
Leakage current | 100 µA maximum*3 | ||
Max. capacitive load | 2.2 µF (with a load resistance of 100 ?) | ||
Load wiring resistance | 2.5 ? maximum*4 | ||
Approved standards | EMC | EMS | IEC61496-1, EN61496-1, UL61496-1 |
EMI | EN55011 Class A, FCC Part15 Class A | ||
Safety | IEC61496-1, EN61496-1, UL61496-1 (type 4 ESPE),IEC61496-2, EN61496-2, UL61496-2 (type 4 AOPD),UL508 | ||
Current consumption | Transmitter | 121 mA | |
Receiver | 100 mA | ||
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less | |
Environmental resistance | Enclosure rating | IP65 (IEC60529) | |
Ambient light | Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less | ||
Operating ambient temperature | -10 to +55 °C (No freezing) | ||
Storage temperature | -10 to +60 °C (No condensation | ||
Operating relative humidity | 35 to 85 % RH (No condensation) | ||
Storage relative humidity | 35 to 95 % RH (No condensation) | ||
Vibration resistance | 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions | ||
Shock resistance | 100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | ||
Material | Main unit case | Aluminum | |
Upper case/lower case | Zinc die-cast | ||
Front cover | Polycarbonate | ||
Weight | Transmitter | Approx 695 g | |
Receiver | Approx 765 g | ||
*1 OFF>ON return time is 125 ms. *2 Note the derating illustrated in the graph to the right when using PNP output. *3 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. *4 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output |