We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Keyence PX-10 , contact FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of products and individual attention to each consumer. We appreciate everyone, who worked with us - therefore, our regular clients obtain the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Kazakhstan, Italy, Bhutan, Cuba, Guyana, Kenya, Qatar, Sri Lanka, Jordan, Suriname, Burma, Morocco, Liechtenstein, Canada, Kiribati, Namibia, Tanzania, Yemen, United States, Haiti, Fiji, Bolivia, Egypt, Costa Rica, Central African Republic, Finland, South Korea, Djibouti, Samoa, Nicaragua, Brunei, Belarus, Moldova, Luxembourg, Angola, Guatemala, Austria, Benin, Turkey, Mauritania, Paraguay, Jamaica, Mozambique. A advanced logistics bond and a partnership network let us to conduct our units anywhere in the world promptly without undermining product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | PX-10 | |
Type | Cable type | |
Output | NPN | |
Response time | 500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) | |
Output selection | LIGHT-ON/DARK-ON | |
Indicator lamp | - Operation indicator:Red LED x 2, DSC orange LED x 1 - Dual digital monitor:Dual 7-segment display [Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together, current value range:0 to 65504, excess gain:0 P to 999 P] - Hold function:Possible to display both peak and bottom hold values. Selectable from 5 variations. - Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)] - Scaling display | |
Detection mode | Light intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor] | |
Shift function | Variable between –1999 and 9999 | |
Timer function | Timer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shot Timer duration selectable:1 ms to 9999 ms Maximum error against the setting value:10% max. | |
Control output | NPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max. | |
External input | Input time 2 ms (ON)/20 ms (OFF) min. | |
Interference prevention | Up to 4 units (in all power modes)*1 | |
Rating | Power voltage | 12 to 24 VDC, Ripple (P-P) 10 % or less, Class 2*2 |
Power consumption | Standard mode:50 mA max. at 24 V/55 mA max. at 12 V Power saving mode:40 mA max. at 24 V/45 mA max. at 12 V | |
Environmental resistance | Enclosure rating | IEC: IP67/JEM: IP67/NEMA: 4X |
Ambient temperature | -10 to +55 °C (No freezing)*3 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Case material | Housing:PBT, display:PSU, display cover/connector cover:SUS304, radiator plate:SUS304, gasket:NBR | |
Weight | Approx. 100 g (Including cable) | |
*1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affected somewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts. *2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m or more (PX-H71/H71TZ) or 10 m or more (PX-H72). *3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below. 2 to 4 Units: -10 to +50 °C, 5 to 17 Units: -10 to +45 °C. |