We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Keyence FS-V21G , contact FAMAGA, the world's major retailer of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of products and personalseparate attention to each customer. We appreciate everyone, who liased with us - therefore, our regular customers bring in the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, North Korea, United States, Pakistan, Azerbaijan, Suriname, Madagascar, Eswatini, Burkina Faso, The Bahamas, Cyprus, Romania, The Gambia, Namibia, Uruguay, Costa Rica, East Timor, Zimbabwe, El Salvador, Cameroon, Georgia, Liberia, Afghanistan, Jamaica, Estonia, Vietnam, Nepal, Haiti, South Korea, Senegal, Cape Verde, Mauritania, Angola, Swaziland, Poland, Panama, New Zealand, Togo, Croatia, Laos, Philippines, Denmark, Ireland, Sierra Leone. A well-developed logistics link and a partnership network guide us to deliver our items anywhere in the world on-time without compromising product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | FS-V21G | |
Type | Main unit, NPN | |
Light source | Green LED | |
Response time | 250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED) | |
Output selection | Light-ON/Dark-ON selectable | |
Indicator lamp | Operation indicator: Red LED Dual digital monitor: Dual 7-segment display [Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 65,520, Excess gain: 0 P to 999 P] Hold function: Possible to display both peak and bottom hold values. Bar LED monitor: Possible to display together with Current Value Excess gain displayed (85 to 115 % in 7 steps) | |
Detection mode | Light intensity/rising edge/falling edge | |
Shift function | Max. ±1,999 (variable) | |
Timer function | Mode | Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, selectable |
Variable range | 1 to 500 ms [1 to 30 ms (in 1 ms increments), 30 to 50 ms (in 2 ms increments), 50 to 200 ms (in 10 ms increments), 200 to 500 ms (in 50 ms increments)] | |
Accuracy | ±10 % of the Preset Value | |
Control output | NPN open-collector 100 mA max. (40 VDC max.)*1, Residual voltage: 1 V max. | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Normal | S-APC OFF: 580 mW max. (24 mA max. at 24 VDC), S-APC ON: 720 mW max. (30 mA max. at 24 VDC)*2 |
ECO half | S-APC OFF: 480 mW max. (20 mA max. at 24 VDC), S-APC ON: 600 mW max. (25 mA max. at 24 VDC)*2 | |
ECO all | S-APC OFF: 430 mW max. (18 mA max. at 24 VDC), S-APC ON: 550 mW max. (23 mA max. at 24 VDC)*2 | |
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max. |
Ambient temperature | -10 to +55 °C (No freezing)*3 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Case material | Polycarbonate | |
Weight | Approx. 80 g (including 2-m cable) | |
*1 20 mA at maximum for the expansion unit. *2 S-APC will be always turned ON when the high-resolution or high-speed mode is selected. S-APC is by default set to OFF in any other mode. *3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: –10 to +50 °C 11 to 16 Units: –10 to +45 °C |