We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
BL-180SO(7030)
Type
Mounting bracket
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking Keyence BL-180SO(7030) , connect FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and private attention to each purchaser. We understand everyone, who joined with us - therefore, our regular consumers procure the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Botswana, Barbados, El Salvador, Romania, Japan, Canada, Senegal, Samoa, Iran, Burkina Faso, Bosnia and Herzegovina, Colombia, Poland, Paraguay, Monaco, Nepal, Morocco, Uzbekistan, The Bahamas, Fiji, Indonesia, Malta, Estonia, Eswatini, Yemen, Uganda, Ireland, Seychelles, Cyprus, Cameroon, Serbia, Mauritania, Iceland, Vietnam, Georgia, Sweden, United States, Dominica, Iraq, Mexico, Bangladesh, South Korea, Czech Republic, Mauritius, Pakistan. A well-built logistics connection and a partnership network guide us to dispatch our items anywhere in the world on-time without disreputing product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Model | BL-180SO(7030) | |
| Reading direction | Front | |
| Light source/Light receiving element | LED/CCD image sensor | |
| Reading distance | 33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width) | |
| Readable bar width | 0.125 to 1.0 mm *2 | |
| Largest readable label width | 80 mm *3 (Using narrow bars of at least 0.19 mm in width) | |
| PCS | 0.45 or more (Refl ectance of white part: 75% or more) | |
| Scanning rate | 500 scans/sec | |
| Supported codes | CODE39, ITF, Industrial 2-of-5, COOP 2-of-5, Codabar, CODE128, EAN/UPC (A·E) | |
| Number of readable digits | 32 digits | |
| Trigger input | Non-voltage input (contact or solid-state), TTL input is also possible. | |
| Serial interface | Applied standard | RS-232C |
| Synchronisation | Start-Stop | |
| Transmission code | ASCII | |
| Baud rate | 600/1200/2400/4800/9600/19200/31250/38400 bps | |
| Data length | 7/8 bits | |
| Parity check | None/Even/Odd | |
| Stop bit length | 1 bit/2 bits | |
| OK/NG output | Output form | NPN |
| Rated load | 24 VDC, 100 mA | |
| Leakage current (at OFF) | 0.1 mA max. | |
| Residual voltage (at ON) | 0.5 V max. | |
| Rating | Power voltage | 5 VDC ±5 %*4 |
| Current consumption | 300 mA | |
| Environmental resistance | Ambient light | Sunlight/Incandescent lamp: 10,000 lux, Fluorescent lamp: 3,000 lux. |
| Operating environment | No dust or corrosive gas present | |
| Ambient temperature | 0 to +40 °C | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Weight | Approx. 165 g | |
| *1 33 ±5 mm when the narrowest bar is less than 0.19 mm. *2 Readable bar width indicates the range of the narrowest readable bar. *3 60 mm when the narrowest bar is less than 0.19 mm. *4 Use a stable power supply of 5 VDC ±5 % . |
