We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Keyence LK-2011 , communicate with FAMAGA, the world's principle supplier of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and private attention to each orderer. We cherish everyone, who cooperated with us - hence, our regular clients procure the most beneficial purchase forms and discounts on the factory-made equipment market. At present, there are more than 4500 such consumers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Cambodia, Angola, Grenada, Gambia, Malaysia, Brunei, Palestine, Iraq, Denmark, Zambia, Norway, Ukraine, Serbia, Iceland, Comoros, Belize, Australia, Niger, Paraguay, Rwanda, Laos, Liechtenstein, Botswana, Czech Republic, Benin, Liberia, Ecuador, Thailand, Kiribati, Panama, Bangladesh, Cape Verde, Tonga, Tajikistan, Montenegro, Armenia, Austria, Indonesia, Lithuania, Poland, Macedonia, Djibouti, Slovakia, Haiti. A well-built logistics network and a partnership network assist us to dispatch our products anywhere in the globe with no delay without disreputing product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been provided, and this number is growing every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To ask a question or place an order, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Model | LK-2011 | |
Type | Amplifier unit, High-precision Controller | |
Measurement mode | ? | |
Reference distance | 30 mm | |
Measuring range | ±5 mm | |
Light source | Type | Visible red semiconductor laser |
Wavelength | 670 nm | |
Output | 0.95 mW | |
Laser Class | FDA (CDRH) 21CFR Part 1040.10 | Class 2 Laser Product |
Laser Class | IEC 60825-1 | |
Spot diameter (at standard distance) | Approx. 30 µm, Approx. 30 x 850 µm | |
Linearity | ±0.1% of F.S. *1 | |
Repeatability | 1 µm*2 | |
Analogue output | Output voltage | ±5 V (1 µm/mV)*3 |
Impedance | 100 ? | |
Output current | 4 to 20 mA (Applicable load: 350 ? max.) | |
Alarm output | NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max. | |
Sampling cycle | 512 µs | |
Other functions | Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment of mirror surface measurement mode, changing the sampling cycle | |
Temperature characteristics | 0.01% of F.S./°C | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Maximum current consumption | 400 mA max. | |
Environmental resistance | Enclosure rating | IP67 |
Ambient light | Incandescent or fl uorescent lamp: 10,000 lux max. | |
Ambient temperature | 0 to +50 °C (No condensation) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Polycarbonate | |
Weight | Approx. 515 g (including cable) | |
*1 Linearity was obtained using KEYENCE's standard target (Zirconia block gauge: LK-031/036, LK-081/086, LK-011, White ceramic block gauge: LK-501/503). *2 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. *3 When measurement is impossible, 12 V (31.2 mA) is output. |