We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Keyence LK-3101 , contact FAMAGA, the world's the best provider of manufacturing equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of products and personalseparate attention to each buyer. We appreciate everyone, who collaborated with us - therefore, our regular customers get the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Bahrain, Ecuador, Canada, Netherlands, Cameroon, Ghana, Cuba, Mauritius, Malaysia, Serbia, Panama, Vietnam, Armenia, Cape Verde, Kyrgyzstan, Fiji, Swaziland, United States, Mozambique, Belarus, Luxembourg, The Bahamas, Lithuania, South Korea, Greece, Zimbabwe, Nicaragua, Brunei, Bolivia, Tonga, Sweden, Macedonia, Philippines, Algeria, Afghanistan, Djibouti, Seychelles, Kazakhstan, Peru, Hungary, Switzerland, Kenya, Ireland, Sudan. A well-developed logistics chains and a partnership network allow us to deliver our goods anywhere in the world as soon as possible without compromising product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of industrial equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | LK-3101 | |
Type | Amplifier unit, Compact high-accuracy Controller | |
Measurement mode | Normal,mirror surface | |
Reference distance | 10 mm (Normal),7.0 mm (mirror surface) | |
Measuring range | ±1 mm (Normal),±0.9 mm (mirror surface) | |
Light source | Type | Visible red semiconductor laser |
Wavelength | 670 nm | |
Output | 0.95 mW | |
Laser Class | FDA (CDRH) 21CFR Part 1040.10 | Class 2 Laser Product |
Laser Class | IEC 60825-1 | |
Spot diameter (at standard distance) | Approx. 20 µm | |
Linearity | ±0.25% of F.S. *1 | |
Repeatability | 0.1 µm*2 | |
Analogue output | Output voltage | ±10 V (±9 V) (0.1 µm/mV)*3 |
Impedance | 100 ? | |
Output current | 4 to 20 mA (Applicable load: 350 ? max.) | |
Alarm output | NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max. | |
Sampling cycle | 128, 256, 512, 2,048 µs (selectable) | |
Other functions | Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment of mirror surface measurement mode, changing the sampling cycle | |
Temperature characteristics | 0.005% of F.S./°C | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Maximum current consumption | 400 mA max. | |
Environmental resistance | Enclosure rating | IP64 |
Ambient light | Incandescent or fl uorescent lamp: 10,000 lux max. | |
Ambient temperature | 0 to +50 °C (No condensation) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Polycarbonate | |
Weight | Approx. 515 g (including cable) | |
*1 Linearity was obtained using KEYENCE's standard target (Zirconia block gauge: LK-031/036, LK-081/086, LK-011, White ceramic block gauge: LK-501/503). *2 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. *3 When measurement is impossible, 12 V (31.2 mA) is output. |