We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Keyence LT-9501H , contact FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of products and individual attention to each consumer. We appreciate everyone, who worked with us - therefore, our regular clients obtain the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Bahrain, Tonga, Botswana, Guatemala, Guinea, Peru, Burkina Faso, Finland, Bhutan, Cyprus, Angola, Equatorial Guinea, Slovenia, Israel, Canada, Mexico, Haiti, Japan, Dominica, Thailand, Uruguay, East Timor, Sudan, Rwanda, Panama, Morocco, Jamaica, Denmark, Suriname, Algeria, Pakistan, Estonia, Mauritania, Fiji, Samoa, Bolivia, Antigua and Barbuda, Nepal, Zambia, Brunei, Kuwait, Benin, Comoros, Cape Verde, Belarus, Zimbabwe. A advanced logistics bond and a partnership network guide us to conduct our items anywhere in the world on-time without undermining product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | LT-9501H | ||
Measuring unit compatibility | Measuring units are interchangeable without factory recalibration. | ||
Display | Minimumdisplayable unit | 0.1 µm*1, 1 µm2, 0.01 ° | |
Display range | ±9,999.99 µm, ±999,999 µm2, 9,999.99 ° | ||
Microscope function | Available | ||
Display cycle | 10 times/sec.*2 | ||
Terminal block | Analogue output | ±10 V x 2 outputs, output impedance: 100 ? | |
Timing input | Non-voltage input | ||
Reset input | |||
Auto-zero input | |||
Monitor dedicated power supply | 24 VDC*3 | ||
Control I/O | Judgment mode | 3-step limits output | For OUT1 and OUT2, and NPN open collector output*4 |
Binary mode | Binary output | Measured data output (21 bits), OUT1/OUT2/PROFILE selectable NPN open collector output*4 | |
Strobe output | NPN open collector output*4 | ||
Binary selector output | |||
Binary selection input | Non-voltage input*4 | ||
Stability output | NPN open collector output | ||
Laser remote input | Non-voltage input | ||
Program switching input | Non-voltage input x 3 inputs | ||
RS-232C interface | Measured data output and control I/O (Selectable up to baud rate 115200 bps.) | ||
Video output | NTSC compliant (PIN connector) | ||
Main functions | Displacement mode | Distance measurement, Transparent objectthickness measurement, Angle measurement,Relative angle measurement, Surface selection,Dark-out, Mask, Trend graph display, and Scanwidth/interval change*5 | |
Profile mode | Area selection (Average, Maximum, Minimum, Maximum-to-minimum, Area) Area calculation, Scan width/interval change, Dark-out, Smoothing, Averaging, and Profile data output*6 | ||
Common | Light intensity accumulation, Microscope (LT-9501H, LT-9501HSO (5654) only), Tolerance judgement, 8-program registration, Calibration, Averaging, Hold modes, Auto-zero, and interface language selection | ||
Rating | Power voltage | 100 to 240 VAC ±10 %, 50/60 Hz | |
Power consumption | 110VA or less | ||
Environmental resistance | Pollution degree | 2 | |
Overvoltage category | II | ||
Ambient temperature | 0 to +35 °C | ||
Relative humidity | 35 to 85 % RH (No condensation) | ||
Weight | Approx. 2.4 kg | ||
*1 Display changes every ±0.3 µm. *2 Varies depending on the setting *3 Dedicated power supply for the monitor specified by KEYENCE. *4 Select either the Limits mode or the Binary mode. *5 Select either the Distance mode or the Profile mode. (Only distance mode is available with the LT-9501HSO (5654) and LT-9001HSO (5655).)The rating of the NPN open-collector output is 30 mA (30 V or lower) maximum, and residual voltage is 0.5 V.The rating of the Non-voltage input is ON voltage 1 V or lower, and OFF current 0.6 mA or lower. *6 Select either the Distance mode or the Profile mode. (Only distance mode is available with the LT-9501HSO (5654) and LT-9001HSO (5655).) The rating of the NPN open-collector output is 30 mA (30 V or lower) maximum, and residual voltage is 0.5 V. The rating of the Non-voltage input is ON voltage 1 V or lower, and OFF current 0.6 mA or lower. |