We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Keyence IM-6140 , contact FAMAGA, the world's major retailer of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of products and private attention to each customer. We appreciate everyone, who liased with us - therefore, our regular consumers bring in the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Lebanon, Georgia, Afghanistan, Sri Lanka, South Sudan, Greece, Croatia, Japan, Liberia, Serbia, Nicaragua, The Bahamas, Yemen, Jamaica, Azerbaijan, Fiji, Belize, The Gambia, Jordan, Guyana, Suriname, Finland, Uruguay, Netherlands, Iran, Djibouti, Mauritius, Gambia, Benin, Egypt, Tajikistan, South Korea, Nigeria, Malaysia, Algeria, Comoros, Mauritania, Hungary, Laos, Zimbabwe, Costa Rica, Vietnam, Rwanda. A well-built logistics link and a partnership network let us to dispatch our units anywhere in the world promptly without disreputing product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | IM-6140 | |
Type | Measurement head | |
Image sensor | 1' 6.6 mega pixel CMOS | |
Display | 10.4' LCD monitor (XGA: 1024 ? 768) External monitor connectable (clone output) | |
Receiver lens | Double telecentric lens | |
Image measurement | Field of view | Wide field: 25 mm, High precision: 6 mm |
Minimum display unit | 0.1 µm | |
Repetition accuracy | Wide field: ±0.5µm High precision: ±0.1µm | |
Measurement accuracy (±2?) | Wide field: ±2µm*1 High precision: ±0.7µm*2 | |
External remote input | No-voltage input (with contacts, without contacts) | |
External output | OK/NG/FAIL/MEAS. | Relay outputRated load 24 VDC 0.5AON resistance 50 m? or less |
Interface | LAN | RJ-45 (10BASE-T / 100BASE-TX / 1000BASE-T) |
USB 2.0 series A | 6 ports (front: 2, rear: 4) | |
Record | Hard disk drive | 250 GB |
Illumination system | Transparent | Telecentric transparent illumination (Green LED) |
Ring | Four division ring illumination (White LED) | |
Coaxial epi-illumination (white LED) | ||
External | Externally connected illumination | |
X stage | Moving range | Within o25 mm field |
Z stage | 20 mm | |
Withstand load | 1 kg | |
Y stage | Moving range | Within o25 mm field |
Power supply | Power voltage | 100 to 240 VAC 50 / 60 Hz |
Power consumption | 310 mA or less | |
Environmental resistance | Ambient temperature | +10 to +35 °C |
Relative humidity | 20 to 80 % RH (No condensation) | |
Weight | Approx 25 kg | |
*1 In the range of o80 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position *2 In the range of o20 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position |